CONTROL LINE OV-10
CONTROL LINE OV-10


SHRINK TO FIT
My scratch built OV-10 Bronco & plans at an 8'
wingspan are too big for a control line model so I
reduced the plans by 62.5% to a 60" wingspan.
Also rather using glow fuel engines, the Control
Line OV-10 will have electric motors.


Here is a layout of the Wing Ribs & Spars:


Install Leading & Trailing Edge


Install Bell Cranks


Reinforce Ply Base


Install Wire between Bell Cranks & Push Rod Linkage


Cut Balsa for Leading & Trailing Edge


Trailing Edge Sheeting


Install Sheeting


Install Wing Tips


Cap Strip Top of Ribs


Plank Bottom Planking


Make Boom Sides


Make Booms


Make Firewalls


Test Fit Firewalls


Sheet Bottom of Booms


Install Firewalls



NEXT
Back to Home